Freight Class Calculator

Estimate your LTL freight class from dimensions and weight using the current 13-tier NMFC density scale. Works in inches/pounds or centimetres/kilograms.

Units

Measure each pallet or crate at its longest, widest and tallest points, including the pallet itself.

Estimated freight class
—
Density
—
Total volume
—
Total weight
—
Density tier
—

NMFC density scale (13 tiers)

Used for commodities classed by density without special handling, stowability or liability factors. Your result is highlighted.

SubDensity (lb/ft³)Class
1Less than 1400
21 to less than 2300
32 to less than 4250
44 to less than 6175
56 to less than 8125
68 to less than 10100
710 to less than 1292.5
812 to less than 1585
915 to less than 22.570
1022.5 to less than 3065
1130 to less than 3560
1235 to less than 5055
1350 or more50

How to calculate freight class

  1. Measure each handling unit (L × W × H) in inches, rounding up to the next whole inch.
  2. Find cubic feet: L × W × H ÷ 1,728, multiplied by the number of units.
  3. Find density: total weight in pounds ÷ total cubic feet.
  4. Look up the class for that density on the scale above.
Example: one 48 × 40 × 48 in pallet weighing 500 lb is 53.33 ft³. 500 ÷ 53.33 = 9.38 lb/ft³, which falls in the 8–10 tier → Class 100.

Lower density means a higher class number and a higher rate per hundredweight. Making a shipment denser — smaller cartons, no wasted pallet space, no unnecessary height — is the most reliable way to lower its class.

Shipping a standard 48 × 40 pallet? See the pallet freight class chart by height and weight.

Not sure which NMFC item applies? Read how to look up an NMFC code.

FAQ

How is freight class calculated?

For density-based items, divide the total shipment weight in pounds by its total volume in cubic feet (L × W × H in inches ÷ 1,728). Look up the resulting density in pounds per cubic foot on the NMFC density scale to find the class.

What changed in the 2025 NMFC update?

NMFTA Docket 2025-1 moved many commodities to density-based classification and expanded the density scale from 11 to 13 tiers, adding Class 55 (35 to less than 50 lb/ft³) and Class 50 (50 lb/ft³ or more).

Should I measure the pallet too?

Yes. Measure the whole handling unit as tendered — including the pallet and any overhang — at its longest, widest and tallest points. Carriers re-measure with dimensioners and will re-class shipments that were under-declared.

Is the calculated class always the class I will be billed?

No. Some commodities are classed by handling, stowability or liability rather than density, and some have their own NMFC item. Use this calculator as an estimate and confirm the NMFC item with your carrier.